Skip to content

How To Apply Griptape To A Hockey Stick

Applying grip tape to a hockey stick is a relatively simple process. The first step is to remove the old grip tape from the stick. This can be done by using a sharp object to pry it off or by using heat (e.g. a hair dryer). The second step is to clean the surface of the stick where the new grip tape will be applied. This can be done by using a solvent (e.g. rubbing alcohol) or by sanding it down

How To Apply Griptape To A Hockey Stick

There is no one definitive way to apply grip tape to a hockey stick. Some people use a spray adhesive, while others use a more traditional masking tape and water method. The most important part is to make sure the grip tape is applied evenly and fully to the surface of the hockey stick.

-Grip tape -Scissors -Hockey stick

  • Cut the griptape to the desired size and shape
  • Peel off the backing paper and stick the griptape to the hockey stick smooth out
  • Clean the surface of the hockey stick with a damp cloth

-The hockey stick should be cleaned and dried before applying the griptape. -The adhesive on the back of the griptape should be peeled off and the tape should be applied to the hockey stick in a straight line. -The excess griptape should be trimmed off with a sharp blade.


Frequently Asked Questions

Should I Put Tape On My Hockey Stick?

There is no definitive answer to this question as different players prefer different methods of taping their sticks. Some people advocate wrapping the entire stick in tape, while others just put a spiral of tape around the blade. There are pros and cons to both methods. Wrapping the entire stick makes it more durable, but it can also make the stick harder to maneuver and can cause the player to lose feel for the puck. Putting a spiral of tape around the blade can help with puck control and grip, but it is less durable and can wear down more quickly. Ultimately, it is up to the player to decide what works best for them.

Where Should I Tape My Hockey Stick?

There are a few options for where to tape your hockey stick. One option is to tape it just below the knob at the top of the stick. This will help keep the stick in your hands and give you more control over the puck. Another option is to tape it just above the heel of your hand. This will help keep the stick in your hand and give you more power when hitting or shooting the puck.

How Many Layers Of Tape Should I Put On My Hockey Stick?

There is no definitive answer to this question as it depends on the type of tape and the preference of the player. Some players prefer one layer while others may use up to five layers. It is important to ensure that the tape is applied evenly and that there are no air bubbles.


In Closing

A well-applied piece of hockey stick grip tape will help improve your grip on the stick and allow you to control the puck better. When applying the grip tape, make sure to smooth it out and remove any wrinkles or bubbles. Start by applying a strip of grip tape down the middle of the stick, and then use your hands to smooth it out and press it down onto the stick. Next, apply strips of grip tape on each side of the middle strip, and again use your hands to smooth it out and press it down onto the stick. Finally, cut off any excess grip tape using a sharp blade.

Leave a Reply

Your email address will not be published.